Electronics For Imaging Pi6500 Pro Instrukcja Użytkownika Pobierz pdf (Strona 4)

Di200

TAUS0631185EN00

Solution ID

Solution Usage

Description

The hard disk drive bracket wont fit in the Pi3502.

Solution

The hard disk drive kit for the Pi3500(kit part number 4179-461) will not fit in the Pi3502. You must use part number 4623-411).

TAUS0631187EN00

Solution ID

Solution Usage

Description

Will the Pi3502 work in a Macintosh environment?

Solution

The Pi3502 will work in a Macintosh environment only with the Postscript option installed.

TAUS0631193EN00

Solution ID

Solution Usage

Description

Is there a kit to convert these models to fax functionality?

Solution

There is no way to add the fax options to these machines, as there are specific fax versions of these machines.

TAUS0631196EN00

Solution ID

Solution Usage

Description

How to enter the maintenance mode.

Solution

To enter the maintenance mode, press Stop- 0-0-Stop-0-2.

TAUS0631202EN00

Solution ID

Solution Usage

Description

Paper exits the machine wrinkled and/or excessively curled.

Solution

CAUSE:

The fuser and transport sections are not properly aligned. If the machine is not level, the angle between the fuser unit and vertical transport section will

increase, putting pressure on the paper.

SOLUTION:

Verify that the machine is level.

TAUS0631207EN00

Solution ID

Solution Usage

Description

How to troubleshoot C500 code when the fuser rollers have melted together, and the thermal fuse and thermostat have both failed.

Solution

Perform the following:

1. Verify that the thermistor is working properly.

2. Check the continuity between the two thermistor leads to verify that there is continuity between the two wires going to the thermistor. Only a few ohms of

resistance should be present.

3. Check PJ5A pins 6 and 7 for continuity. The resistance value displayed on your multi meter should be the same as that received on the first check. If not,

October 2006

1 2 3 4 5 6 7 8 9 ... 16 17

Komentarze do niniejszej Instrukcji

Brak uwag

Electronics For Imaging Pi6500 Pro Instrukcja Użytkownika Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Serwery wydruku Electronics For Imaging Pi6500 Pro